Factory price silicone liquid adhesive glue for solar panels and all purpose silicone sealant

Product Features:

• One-component, neutral-curing high-performance silicone sealant.
• It has good adhesion with most metal and non-metal materials, and does not pollute the surrounding environment.
• The cured elastomer has excellent electrical insulation, high and low temperature resistance, aging resistance, and resistance to external lines.
• Excellent flame retardant performance, reaching FV-0 level.

The Main Purpose:

• The sealing of the frame of the solar cell module.
• Solar cell module junction box bonding.
• Solar lamps are sealed.

Instructions:

• Use a cleaning agent to clean the grease, dust, scale, etc. on the glued surface, and apply glue after drying.
• Form a continuous, fully filled colloid.
• After applying glue, trim and remove excess glue in time.
• After opening the package, use it up as much as possible; if you don't use it up once, when you use it again, squeeze out the cured part and use it continuously.
• When applying glue, ensure that the bonded surface is in full contact with the sealant, and there can be no gaps and air bubbles.
• It should be stored in a cool, dry and ventilated place below 27°C. The storage period is 12 months. After this period, it can be used only after passing the inspection.

Package

• Cartridge package:280ml,300ml
• Sausage package: 590ml
• Drums