Two-component structural silicone sealant

Product features

This product is a two-component, neutral curing, high modulus product.
When used, A: B components are mixed in a volume ratio of 10:1.
Excellent weather resistance such as high and low temperature resistance, ozone resistance, and UV resistance.
Has elasticity and good adhesion to most building materials.
Displacement capacity ± 20%.

Suitable for structural assembly of glass curtain walls; especially for structural bonding of curtain wall unit glass and metal components in workshop assembly, as well as structural bonding assembly of insulating glass.

1 To ensure good adhesion of silicone structural adhesive, the surface of the bonded material must be clean, dry, and free of dirt.
2 Apply low viscosity tape to the areas that require protection, and trim and remove the tape before the adhesive has cured.
3 Users can adjust the curing speed by changing the mixing ratio according to their actual needs.
4 Users must determine the suitability of the product themselves and conduct on-site compatibility bonding tests to confirm whether the product has good adhesion with the substrate and whether the interface is truly full.

1. Not suitable for oil containing or oil seeping surfaces.
2. Not suitable for use on frosted or damp surfaces.
3. Not suitable for continuous immersion in water or places that are humid all year round.
4. B component cannot be exposed to the air for a long time.

1. Special attention should be paid to maintaining a good ventilation environment in the construction site.
2. If accidentally entering the eyes , immediately rinse with plenty of water and seek medical attention.
3. Avoid prolonged contact with the skin and avoid contact with children.
4. Do not contaminate food, drugs, or cosmetics.

产品询盘