High Bonding Strength Construction Two Component Silicone Sealant for Insulating Glass
Two-component insulating glass sealant
Product features
- 1. This product is a two-component, neutral curing product.
- 2. When used, A: B components are mixed in a volume ratio of 10:1.
- 3. Fast curing.
- 4. Excellent high and low temperature resistance and weather aging resistance.
Main purpose
- Replace polysulfide adhesive for secondary bonding and sealing of hollow glass assembly.
Usage method
- 1 To ensure good adhesion of silicone structural adhesive, the surface of the bonded material must be clean, dry, and free of dirt.
- 2 Apply low viscosity tape to the areas that require protection, and trim and remove the tape before the adhesive has cured.
- 3 Users can adjust the curing speed by changing the mixing ratio according to their actual needs.
- 4 Users must determine the suitability of the product themselves and conduct on-site compatibility bonding tests to confirm whether the product has good adhesion with the substrate and whether the interface is truly full.
Usage restrictions
- 1. Cannot be used for structural assembly.
- 2. Cannot be used on oil containing or oil seeping surfaces.
- 3. B component cannot be exposed to the air for a long time.
Safety notice
- 1.Special attention should be paid to maintaining a good ventilation environment in the construction site.
- 2.If accidentally entering the eyes during use, immediately rinse with plenty of water and seek medical attention.
- 3. Avoid prolonged contact with the skin and avoid contact with children.
- 4. Do not contaminate food, drugs, or cosmetics.
Keep in storage
- It should be stored in a cool, dry and ventilated place below 27°C.
- The storage period is 12 months.
- After this period, it can be used only after passing the inspection.
Transport
- This product is transported as non dangerous goods.
Colour
- Component A is white, component B is black.
Packaging specifications
- Package A component: 190L.
- Package B component: 19L.
产品询盘
